Product Comparison for 2 products

Forward

Article

Technical Data

Cable length:

Side 1

Tightening torque:

Family construction form:

Thread:

suitable for corrugated tube (internal Ø):

Coding:

Width across flats:

Degree of protection (EN IEC 60529):

Side 2

Tightening torque:

Family construction form:

Thread:

Coding:

Degree of protection (EN IEC 60529):

Electrical data | Supply

Operating voltage AC max.:

Operating voltage DC max.:

Operating voltage AC (UL-listed):

Operating voltage DC (UL-listed):

Current operating per contact max.:

Device protection | Electrical

Additional condition protection degree:

Pollution Degree:

Material group (IEC 60664-1):

Mechanical data | Material data

Material housing:

Locking material:

Mechanical data | Mounting data

Mounting method:

Environmental characteristics | Climatic

Operating temperature min.:

Operating temperature max.:

Additional condition temperature range:

Important installation notes

Note on strain relief:

Note on bending radius:

Conformity

Product standard:

Cable data

Cable

Cable identification:

Cable Type:

Approval (cable):

Cable weight [g/m]:

Material wire:

Resistor (core):

Single wire Ø (core):

Construction (core):

Diameter (core):

AWG:

Material wire isolation:

Material property wire insulation:

Shore hardness wire isolation:

Wire-Ø incl. isolation:

Color/numbering of wires:

Stranding combination:

Shield:

Material jacket:

Material property (jacket):

Shore hardness jacket:

Outer-Ø (jacket):

Color jacket:

chemical resistance:

Nominal voltage:

Test voltage:

Current load capacity:

Temperature range (fixed):

Temperature range (mobile):

Bending radius (fixed):

Bending radius (dynamic):

No. of bending cycles (C-track):

Travel speed (C-track):

Acceleration (C-track):

General data | Cable

Cable identification:

Cable Type:

Jacket Color:

Type of Certificate:

Structure | Cable

Amount stranding:

Stranding:

wire arrangement:

Mechanical data | Cable

Cable weigth:

Material jacket:

Shore hardness jacket:

Freedom from ingredients (jacket):

Outer-diameter (jacket):

Tolerance outer diameter (sheath):

Material wire insulation:

Amount wires:

Outer diameter insulation :

Outer diameter tolerance core insulation:

Shore hardness wire insulation:

Ingredient freeness wire insulation:

Amount strands (wire):

Diameter of single wires:

Conductor crosssection (wire):

Material conductor wire:

Conductor type (wire):

Electrical data | Cable

Nominal voltage AC max.:

Current load capacity (standard):

Current load capacity min. wire:

Electrical resistance line constant wire:

AC withstand voltage (wire - wire):

Power frequency withstand voltage (wire - jacket):

Temperature range | Cable

Min. operating temperature (static):

Max. operating temperature (fixed):

Operating temperature min. (dynamic):

Operating temperature max. (dynamic):

Resistances | Cable

Hydrolysis resistance:

Ozone resistance:

Seewater resistance:

Acid and alkali resistance:

UV resistance:

Flame resistance:

chemical resistance:

Gasoline resistance:

Oil resistance:

Installation | Cable

Bending radius (fixed):

Bending radius (dynamic):

No. of bending cycles (C-track):

Traversing distance (C-track):

Travel speed (C-track):

No. of torsion cycles:

Torsion stress:

Torsion speed:

Classifications

ECLASS-6.0:

ECLASS-6.1:

ECLASS-7.0:

ECLASS-8.0:

ECLASS-9.0:

ECLASS-10.1:

ECLASS-11.1:

ECLASS-12.0:

ETIM-5.0:

Commercial data

GTIN:

customs tariff number:

Packaging unit:

Approvals

Certificates

Move › M12 male 0° / M12 female 0° A-cod. V2A PUR 4x0.34 bk UL/CSA 5m Weight: 0.211 kg Art.No.: 7002-40021-6240500 34,48 € * not available	‹ Move M12 male 0° / M12 female 0° A-cod. V2A PUR 4x0.34 bk UL/CSA+drag ch. 5m Weight: 0.202 kg Art.No.: 7002-40021-6340500 34,48 € * Contact Us for Availability


5 m	5 m

0,6 Nm	0,6 Nm
M12	M12
M12 x 1	M12 x 1
10 mm	10 mm
A	A
SW13	SW13
IP66K, IP67	IP66K, IP67

0,6 Nm	0,6 Nm
M12	M12
M12 x 1	M12 x 1
A	A
IP66K, IP67	IP66K, IP67

250 V	250 V
250 V	250 V
30 V	30 V
30 V	30 V
4 A	4 A

inserted, screwed	inserted, screwed
3	3
I	I

PUR	PUR
Stainless steel 1.4305 (V2A)	Stainless steel 1.4305 (V2A)

inserted, screwed, Shaking protection	inserted, screwed, Shaking protection

-25 °C	-25 °C
85 °C	85 °C
depending on cable quality	depending on cable quality

Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.	Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.
Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.	Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.

DIN EN 61076-2-101 (M12)	DIN EN 61076-2-101 (M12)


624	-
2 (PUR/PVC)	-
UL (AWM-Style 20549/1731), CSA; CE conform	-
42,68 g	-
Cu wire, bare	-
max. 57 Ω/km (20 °C)	-
0.1 mm	-
42× 0.1 mm (multi-strand wire class 6)	-
4× 0.34 mm²	-
similar to AWG 22	-
PVC	-
CFC-, cadmium-, silicone- and lead-free	-
43 ±5 D	-
1.25 mm ±5%	-
br, bk, bl, wh	-
4 wires twisted	-
no	-
PUR/PVC	-
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant	-
80 ±5 A (PVC-under jacket); 85 ±5 A (PUR-jacket)	-
4.6 mm ±5%	-
black	-
good resistance to oil, gasoline and chemicals	-
UL 300 V AC	-
2000 V AC	-
to DIN VDE 0298-4	-
-30...+80 °C	-
-5...+80 °C	-
10× outer Ø	-
15× outer Ø	-
max. 2 Mio. (25 °C)	-
max. 3.3 m/s	-
max. 5 m/s²	-

-	634
-	3
-	black
-	cURus

-	1
-	4 wires twisted
-	brown, black, blue, white

-	36,3 g/m
-	PUR
-	90 ± 5 Shore A
-	lead-free, cadmium-free, CFC-free, halogen-free, silicone-free
-	4,5 mm
-	± 5 %
-	PP
-	4
-	1,25 mm
-	± 5 %
-	70 ± 5 Shore D
-	lead-free, cadmium-free, CFC-free, halogen-free, silicone-free
-	42
-	0,1 mm
-	0,34 mm²
-	Stranded copper wire, bare
-	strand class 6

-	300 V
-	to DIN VDE 0298-4
-	4,8 A
-	57 Ω/km @ 20 °C
-	2,5 kV @ 60 s
-	2,5 kV @ 60 s

-	-40 °C
-	80 °C / 90 °C @ 10000 h Operation
-	-25 °C
-	80 °C / 90 °C @ 10000 h Operation

-	-
-	-
-	-
-	-
-	DIN EN ISO 4892-2 A
-	UL 1581 § 1090 \| IEC 60332-2-2 \| UL 1581 § 1100 FT2
-	Good, application-related testing
-	Good, application-related testing
-	Good, application-related testing \| DIN EN 60811-404

-	5 x Outer diameter
-	10 x Outer diameter
-	10 Mio. @ 25 °C
-	10 m @ 25 °C \| horizontal
-	3 m/s @ 25 °C
-	2 Mio.
-	± 180 °/m
-	35 cycles/min

27279218	27279218
27279218	27279218
27279218	27279218
27279218	27279218
27060311	27060311
27060311	27060311
27060311	27060311
27060311	27060311
EC001855	EC001855

4048879355445	4048879852999
85444290	85444290
1	1


✓	✓
✓	✓

Login

Product Comparison for 2 products