MDD DC/DC-CONVERTOR SWITCH MODE

IN: 24VDC OUT: 2x10V/0,25ADC

Available

INPUT: 24 V DC
OUTPUT: ±10 V DC
Output rating: 5 W
Current: 2× 0.25 A
Condensation not permitted
Restart after overload by removing supply voltage

Electrical data

Security level	SELV

Electrical data | Input

Fuse protection primary side internal	1,5 A
Characteristic back-up fuse	Inertia
Input voltage DC	24 V
Current input AC	0,85 A

Electrical data | Output

Output voltage DC	10 V
Output voltage DC min.	8,55 V
Output voltage DC max.	10,5 V
Output voltage adjustable	no
Output current per channel max.	0,25 A
Ripple max.	0,2 %

Device protection | Electrical

Insulation test voltage input - output	4 kV
Short-circuit protected	yes
Overload resistant	yes

Mechanical data | Mounting data

Mounting method	geschnappt
Suitable for mounting type	Mounting rail TH35, (EN 60715), G32

Environmental characteristics | Climatic

Operating temperature min.	0 °C
Operating temperature max.	50 °C

Conformities, approvals, certificates

Low Voltage Directive	EN 61204-3

Connection types

Connection type 1	Input
Connection type 2	Output

Connection type 1

Connection type 2